click here to view PDF

Our high-accuracy model. This transducer is available in industry standard lengths and pressure ranges. The GT72 has a non-linearity accuracy specification of ±0.5% of full scale maximum BFSL. Repeatability is better than 0.1% of full scale. Zero drift: ±0.01% of full scale/ºF, ±0.02% of full scale/ºC. Sensitivity drift: ±0.01% of full scale/ºF, ±0.02% of full scale/ºC.

click here to view PDF

Our most popular model. The GT76 has a non-linearity specification of ±1.0% of full scale. Repeatability is better than 0.1% of full scale. Zero drift: ±0.01% of full scale/ºF, ±0.02% of full scale/ºC. Sensitivity drift: ±0.01% of full scale/ºF, ±0.02% of full scale/ºC.

click here to view PDF

Our 4-20mA & 0-10 volt output models. This series has a non-linearity specification of ±1.0% of full scale maximum BFSL. Repeatability within ±1% of full scale. Zero drift: ±0.01% of full scale/ºF, ±0.02% of full scale/ºC.

click here to view PDF

The GT100 is applicable where rapid thermal change may occur. It's unique design help minimize short-term thermal drift. Non-linearity specification is ±0.5% of full scale maximum BFSL. Repeatability within 0.1% of full scale. Zero drift: ±0.005% of full scale/ºF, ±0.01% of full scale/ºC. Sensitivity drift: ±0.01% of full scale/ºF, ±0.02% of full scale/ºC.

click here to view PDF

Our space saver model has a stem length of 3.5 inches. The GT75 has a non-linearity specification of ±1.0% of full scale maximum BFSL or ±0.5% when the "A" option is specified. Repeatability is better than 0.1% of full scale. Zero drift: ±0.01% of full scale/ºF, ±0.02% of full scale/ºC. Sensitivity drift: ±0.01% of full scale/ºF, ±0.02% of full scale/ºC.

click here to view PDF

The HP's custom design relieves any rapid thermal drift concerns. The non-linearity specification of the GT72HP is ±0.5% of full scale maximum BFSL, and the GT76HP is ±1.0% of full scale maximum BFSL. Zero drift: ±0.005% of full scale/ºF, ±0.01% of full scale/ºC. Sensitivity drift: ±0.005% of full scale/ºF, ±0.01% of full scale/ºC. * The HP-Series 12" units are available in 5K and under. * The HP-Series 6" units are available in 10K and under.

This pressure sensor is designed to measure air and hydraulic pressures. Input voltage: 5-10 volts DC or AC, 12 volts maximum. Output voltage: 20mV/V nominal. Accuracy is ±1.0% of full scale.

Gentran offers a wide variety of cable assemblies, complete with connectors. Available with teflon coating or armored shielding, both with thermocouple option. This makes the Gentran cable assemblies the ideal item to complete your melt pressure and temperature measurement operation.

Gentran
42025 Osgood Rd, Fremont, CA 94539
Phone 510-226-9343 • Fax 510-226-1112 • E-Mail info@gentran-corp.com

Copyright © 2000, Gentran. All Rights Reserved.
Designed by Interactive Identity